How To Turn On Bush Tv Without Remote

How To Turn On Bush TV Without Remote

Whether you’ve misplaced your remote or it stopped working, not having it can be frustrating when you want to watch your favorite shows on your Bush TV. However, don’t worry! There are a few alternative methods you can use to turn on your Bush TV without a remote. In this article, we will explore some of these solutions, so you can get back to enjoying your TV in no time.

Using the Buttons on Your TV

If you can’t find your remote or it’s not functioning properly, one of the simplest ways to turn on your Bush TV is through the buttons directly located on the TV itself. Here’s how:

1. Locate the Power button: Start by finding the Power button on your Bush TV. It is usually located on the side or at the bottom of the TV. Depending on the model, it might be labeled as “Power” or have a symbol resembling a circle with a line in the middle.

2. Press the Power button: Once you’ve located the Power button, press it firmly, and hold it down for a few seconds. You should see the screen light up and the TV turn on.

Please note that some Bush TVs may have an additional button for standby mode. In this case, you might need to press the Power button first, followed by the Standby button, to fully turn on the TV.

Using the Power Source

If the buttons on your Bush TV don’t seem to be working, or if they are inaccessible, you can try using the power source directly to turn on your TV. Follow these steps:

1. Locate the power cord: Start by finding the power cord attached to your Bush TV. The power cord typically plugs into a wall socket or a power strip.

2. Unplug the power cord: Carefully unplug the power cord from the socket or power strip. Make sure not to pull on the cord itself, but rather grip the plug firmly.

3. Wait a few seconds: After unplugging the power cord, wait for about 10 to 15 seconds. This allows any residual electrical charge to dissipate.

4. Plug the power cord back in: Reconnect the power cord to the socket or power strip firmly. Ensure it is securely plugged in.

5. Turn on your TV: Once the power cord is connected, your Bush TV should turn on automatically. If it doesn’t, try pressing the Power button on the TV, if available.

Using the power source method allows you to reset your TV’s power and can often resolve any technical issues that prevent it from turning on.

Using a Universal Remote

If you have a universal remote lying around or decide to borrow one from a friend or family member, you can use it to turn on your Bush TV. Follow these steps:

1. Program the universal remote: First, you need to program the universal remote to work with your Bush TV. Look for the instruction manual that came with the remote to learn how to program it. Alternatively, you can search online for instructions specific to your universal remote brand and model.

2. Power on the universal remote: Once your universal remote is programmed, ensure that it is powered on and ready to use. Check the remote’s batteries if it appears to be unresponsive.

3. Press the Power button: Point the universal remote towards your Bush TV and press the Power button. The TV should turn on if the remote is programmed correctly.

Using a universal remote can provide a convenient solution, especially if you frequently lose or misplace your TV remote.


Losing or not having access to your remote doesn’t have to prevent you from using and enjoying your Bush TV. By utilizing the power buttons on your TV itself, the power source, or a universal remote, you can easily turn on your Bush TV without needing the original remote. Try out these simple methods and get back to watching your favorite content hassle-free!

Leave a Comment