How To Scribe Skirting Boards

How To Scribe Skirting Boards


Installing skirting boards is an essential step in finishing off the edges of a room. Skirting boards not only enhance the aesthetic appeal of a space, but they also protect the walls against damage and conceal any uneven gaps between the floor and the wall. One crucial technique to master in skirting board installation is scribing. Scribing allows you to seamlessly fit the skirting board against uneven walls and ensure a neat finish. In this guide, we will walk you through the steps on how to scribe skirting boards effectively, even if you have no prior experience with carpentry.

Materials You Will Need

Before we dive into the steps, here’s a list of items you will need:

  • Skirting board
  • Pencil or marking tool
  • Mitre saw or miter box and handsaw
  • Coping saw
  • Wood adhesive
  • Hammer
  • Nails or screws
  • Electric sander or sandpaper
  • Paint or varnish (optional)

Steps to Scribe Skirting Boards

Step 1: Measure and Cut

Start by measuring the wall where you will be installing the skirting board. Use a measuring tape to determine the length required for the skirting board. Ensure you measure both the top and bottom edges of the wall, as they may vary due to unevenness.

Transfer the measurements to the skirting board and make a precise mark at the required length. Use a mitre saw or a miter box and handsaw to make a clean cut at a 45-degree angle. Repeat this process for all the required lengths of skirting board.

Step 2: Scribe the Skirting Board

Now comes the crucial step of scribing the skirting board to fit against the uneven wall. Start by placing the skirting board in position, making sure it aligns with the adjacent board. Use a pencil or marking tool to mark the contours of the wall onto the back of the skirting board. This will create a line that will guide you during the scribing process.

Take a coping saw and carefully follow the pencil line, cutting away the excess wood. Take your time and be patient during this process, as precision is key. Gradually shape the skirting board until it fits snugly against the wall, following its irregularities.

Step 3: Finishing Touches

Once you have achieved a perfect fit, it’s time to add the finishing touches. If the skirting board is not long enough to cover the entire length, it may require joining with another skirting board. To join two boards, make a 45-degree angle cut at the end of one board and a reverse-angle cut on the other. Apply wood adhesive to the mitered ends of the boards and fit them together, ensuring a seamless joint.

Now, secure the skirting board to the wall using either nails or screws. Pre-drill the holes to prevent the wood from splitting and use a hammer to gently tap the nails in or a screwdriver to insert screws. Space the fixings evenly along the length of the skirting board.

After securing the skirting board, use an electric sander or sandpaper to smooth any rough edges and achieve a professional finish. Finally, if desired, apply a coat of paint or varnish to match the overall aesthetics of the room.


Scribing skirting boards is an invaluable skill that allows you to achieve flawless results, even when dealing with uneven walls. By following these simple steps, you can confidently install skirting boards like a professional. Remember to measure carefully, scribe accurately, and take your time to ensure a perfect fit. With patience and practice, your finished skirting board installation will add that final touch to your room, providing a polished and visually pleasing look.

Leave a Comment