How to Open Subaru Key Fob to Replace Battery
Is your Subaru key fob running low on battery? Don’t fret! Replacing the battery in your Subaru key fob is a simple task that you can do yourself. In this article, we will guide you through the process of opening your Subaru key fob to replace the battery, using easy-to-understand language. So, let’s get started!
What You Will Need
Before diving into the process, gather the following items:
1. New battery: Make sure you purchase a compatible battery for your Subaru key fob. Check your vehicle’s manual or consult a local dealership to determine the correct battery type.
2. Small flathead screwdriver: This will help you pry open the key fob.
Now that you have everything you need, let’s proceed with opening the Subaru key fob.
Step-by-Step Guide
1. Locate the key release switch: Most Subaru key fobs have a small switch located at the back. This switch is typically used to release the physical key from the fob. Locate this switch and slide it to release the key.
2. Find the notch: Once you have removed the physical key, flip the key fob upside down. Look for a small notch or slot on the side of the fob. This is where you will insert the screwdriver to open the case.
3. Insert the screwdriver: Carefully insert the small flathead screwdriver into the notch or slot. Apply gentle pressure and twist the screwdriver to pry open the key fob. Be cautious not to use excessive force to avoid damaging the fob.
4. Separate the halves: Slowly separate the two halves of the key fob. It may take a bit of wiggling to detach them completely. Once the halves are separated, you should see the internal circuit board and the battery compartment.
5. Remove the old battery: Identify the battery compartment, which is usually located near the top of the circuit board. You might need to use your screwdriver or a pair of tweezers to carefully remove the old battery. Take note of the battery’s orientation, as you will need to insert the new one in the same direction.
6. Insert the new battery: Take the new battery and properly align it with the contacts in the battery compartment. Press it firmly into place. Ensure that the positive and negative sides of the battery align with the markings inside the compartment.
7. Reassemble the key fob: Once the new battery is securely in place, it’s time to reassemble the key fob. Gently align the two halves together and press them firmly until they click back into place. Make sure the fob is properly closed before moving on.
8. Test the key fob: Now that the key fob is back together, it’s time to test it. Stand near your vehicle and press the buttons on the fob to check if it is functioning correctly. If the buttons respond as expected, then congratulations! You have successfully replaced the battery in your Subaru key fob.
Final Thoughts
Replacing the battery in your Subaru key fob is a straightforward task that anyone can do with a little patience and care. By following the step-by-step guide provided above, you can save both time and money by avoiding a trip to the dealership for a simple battery replacement.
Remember to always consult your vehicle’s manual or seek assistance from a professional if you encounter any difficulties or uncertainties during the process. With a properly functioning key fob, you can continue to enjoy the convenience and security that it provides while operating your Subaru.