How To Inflate Exped Synmat 7: A Step-by-Step Guide
Camping is a great way to connect with nature and unwind from the hustle and bustle of daily life. Inflatable sleeping pads, like the Exped Synmat 7, provide comfort and insulation, ensuring a good night’s sleep while you’re out in the wilderness. However, if you’re new to using this type of gear, you might find it a bit tricky to inflate. In this article, we will guide you through the process of inflating the Exped Synmat 7, step-by-step.
Step 1: Unpack and Lay Out the Mat
Start by unpacking your Exped Synmat 7 and finding a suitable area to inflate it. Look for a flat surface, free from sharp objects or debris, which could potentially damage the mat. Once you’ve identified a safe spot, carefully unroll the sleeping pad and lay it out.
Step 2: Locate the Inflation Valve
On one end of the Synmat 7, you will find an inflation valve. It is typically made of durable plastic and has a small rubber gasket inside. This valve is used to both inflate and deflate the mat, so it’s essential to familiarize yourself with its location and functionality.
Step 3: Prepare to Inflate
Before starting the inflation process, check the valve to ensure it is in the closed position. The valve will have two positions: closed and open. You can determine the current position by examining the small lever or dial on the valve. For inflation, the lever should be in the closed position.
Step 4: Use Your Breath
To begin inflating the Exped Synmat 7, position your mouth over the inflation valve and blow air into it. Depending on the size and capacity of your lungs, it may take several breaths to fully inflate the pad. Take your time, and be mindful not to overexert yourself. Pace yourself and take breaks as needed.
Step 5: Optional: Use an Inflation Bag
If you prefer to conserve your energy or find it difficult to inflate the pad with just your breath, an inflation bag can be a useful tool. An inflation bag is designed to capture a large volume of air, which can then be easily transferred into the sleeping pad. Attach one end of the bag to the inflation valve and roll the other end to capture air. Press on the bag to force the air into the Synmat 7. Repeat this process until the pad is fully inflated.
Step 6: Secure the Valve
Once you have inflated the Exped Synmat 7 to your desired firmness, it’s crucial to secure the valve to prevent any air from escaping. To do this, simply twist the lever or dial on the valve to the open position, then press it down firmly until it clicks into place. This ensures a tight seal and prevents air leakage throughout the night.
Step 7: Test for Air Leaks
Before using your fully inflated sleeping pad, it’s prudent to check for any potential air leaks. This can be done by pressing your hand or body weight firmly over the entire surface of the pad, feeling for any areas where the material may give or deflate slightly. If you detect a leak, you can use the included repair kit to patch it up and ensure optimal performance.
In conclusion, inflating the Exped Synmat 7 is a straightforward process that can be accomplished with a few simple steps. By following this guide, you’ll be able to quickly and effectively inflate your sleeping pad, ensuring a comfortable and restful night’s sleep during your camping adventures. Remember to take your time, secure the valve, and test for air leaks to maximize the longevity and performance of your Exped Synmat 7. Happy camping!