How To Disassemble Peloton Tread

How to Disassemble Peloton Tread

Have you decided to move your Peloton Tread to a new location, or perhaps you simply want to clean or repair it? Whatever the reason, disassembling your Peloton Tread may seem like a daunting task. But fear not! In this article, we will guide you through a step-by-step process on how to disassemble your Peloton Tread smoothly and safely.

Before we begin, it is essential to ensure your safety during the disassembly process. Make sure to turn off the power and unplug your Peloton Tread from the electrical outlet. We also recommend wearing protective gloves to avoid any injuries while handling the equipment. With safety in mind, let’s get started!

Step 1: Removing the Safety Key
The first step when disassembling your Peloton Tread is to remove the safety key. The safety key is a small magnet attached to a string that you can find on the console panel. Simply disconnect the key from the console by gently pulling it out. This step ensures that the Tread won’t start unexpectedly during the disassembly process.

Step 2: Detaching the Display
The next step is to detach the display from the handlebars. Locate the three screws that connect the display to the handlebars. Use a screwdriver to loosen the screws and carefully remove the display. Ensure you keep track of the screws so that you don’t misplace them.

Step 3: Folding the Tread
Peloton Tread is designed to be foldable, which makes it easier to move or store. To fold the Tread, make sure you are on a flat surface. Locate the two latches near the base of the Tread, one on each side. Disengage the latches by pulling them upwards, then carefully lift and fold the running deck towards the console until it locks in place.

Step 4: Removing the Console Mast
With the Tread folded, it’s time to remove the console mast. Start by locating the screws that attach the console mast to the Tread. They are usually located underneath the mast base. Use a screwdriver to remove these screws and gently detach the console mast. Again, keep the screws somewhere safe to avoid misplacing them.

Step 5: Detaching the Handrails
The handrails of the Peloton Tread can also be detached for easier disassembly or transport. Look for the screws on each side of the handrails near the console mast. Unscrew them and carefully remove the handrails from the Tread. Be cautious while handling the handrails to prevent any damage.

Step 6: Disassembling the Base
To completely disassemble your Peloton Tread, you will need to separate the base from the running deck. This step requires some strength and caution. Hold the base firmly and lift it upwards, sliding it away from the running deck. Make sure to keep a balanced stance and avoid straining your back.

Step 7: Storing or Moving the Disassembled Parts
Now that you have successfully disassembled your Peloton Tread, it’s crucial to store or move the parts correctly. Store the screws and smaller components in a secure container to prevent loss. If you plan to move the Tread to another location, consider using padded wraps or blankets to protect the parts from scratches or damage during transportation.

Remember, when reassembling your Peloton Tread, follow the steps in reverse order. Take your time and refer to the manufacturer’s manual if needed. If you encounter any difficulties during the process, it is recommended to seek assistance from Peloton customer support or a professional technician.

In conclusion, disassembling your Peloton Tread is not as complicated as it may initially seem. By following these step-by-step instructions, you can safely disassemble your Peloton Tread without any hassle. Remember to prioritize your safety, take your time, and keep track of the screws and components. Whether you are moving or cleaning your Tread, you are now equipped with the knowledge to disassemble and reassemble it with confidence.

Leave a Comment