How To Reset Njoy Ace


The Njoy Ace is a popular electronic cigarette device that provides a satisfying vaping experience. Like any electronic device, it may sometimes encounter issues that require a reset. Resetting the Njoy Ace can be a simple and effective solution to fix common problems such as device freezing or unresponsiveness. In this article, we will guide you through the step-by-step process of resetting your Njoy Ace, ensuring that you can continue to enjoy your vaping experience without any interruptions.

Preparing for the Reset

Before proceeding with the reset, it is important to take a few precautions to ensure the safety and functionality of your Njoy Ace. Here are some necessary steps to follow:

1. Remove the pod: To prevent any accidental activation during the reset process, remove the pod from the device. You can do this by simply pulling the pod out from the top of the Njoy Ace.

2. Check the battery: Ensure that your Njoy Ace has sufficient battery life. If the battery is running low, it is best to charge it fully to avoid any potential issues during the reset.

3. Clean the device: Consider giving your Njoy Ace a quick clean to remove any dust or debris that may affect its performance. Use a soft cloth or cotton swab to gently wipe the exterior and interior of the device, paying attention to the connection points.

Performing the Reset

Once you have prepared your Njoy Ace for the reset, follow these steps to perform the reset:

1. Remove the pod: Double-check that the pod has been removed from the device before continuing with the reset process.

2. Locate the reset button: On the Njoy Ace, you will find a small reset button located at the bottom of the device. It is usually recessed to prevent accidental reset.

3. Press the reset button: Using a small, pointed object such as a toothpick or a paperclip, press and hold the reset button for about 10 seconds. You may feel a slight click when the button is pressed.

4. Release the reset button: After holding the reset button for the specified duration, release it. The Njoy Ace will now begin the reset process.

5. Observe the device: While the reset is in progress, observe the device for any changes. The LED lights on the Njoy Ace may flicker or turn off temporarily during this stage.

6. Restart the device: Once the reset is complete, the Njoy Ace will automatically restart. You can now insert the pod back into the device.

Troubleshooting Tips

If the reset did not resolve your issues, here are a few additional troubleshooting tips to try:

1. Charge the device: Ensure that your Njoy Ace has enough battery life. Connect it to a charger and make sure it charges fully.

2. Clean the pod contacts: Sometimes, residue or e-liquid buildup on the pod contacts can cause connectivity issues. Carefully clean the contacts on both the device and the pod using a cotton swab slightly dampened with isopropyl alcohol.

3. Check for firmware updates: Check the official Njoy website or contact customer support to see if there are any available firmware updates for your device. Updating the firmware can often resolve software-related issues.

4. Replace the pod: If all else fails, it might be worth trying a new pod. Sometimes, a faulty pod can cause the device to malfunction.


The Njoy Ace is a remarkable vaping device that provides an enjoyable experience for its users. However, like any electronic device, it may encounter issues from time to time. By following the simple reset process outlined in this article, you can troubleshoot and resolve common problems with your Njoy Ace. Remember to prepare your device, perform the reset correctly, and try additional troubleshooting tips if needed. With these steps, you can ensure that your Njoy Ace continues to deliver satisfying vaping sessions.

Leave a Comment