How to Reset Adblue Warning on Peugeot Partner: A Step-by-Step Guide
If you own a Peugeot Partner equipped with an Adblue system, it’s important to know how to reset the Adblue warning when it appears. The Adblue warning light usually indicates that your vehicle’s Adblue tank is running low or is empty, and needs to be refilled. But don’t worry, resetting the warning is a simple process that you can do on your own. In this guide, we’ll walk you through the steps to reset the Adblue warning on your Peugeot Partner.
Note: The instructions below are specific to Peugeot Partner models. For other Peugeot models, the steps might vary slightly. It’s always recommended to consult your vehicle’s user manual for accurate instructions.
Step 1: Locate the Adblue Tank and Filling Cap
The Adblue tank in your Peugeot Partner is typically located near the fuel tank, usually on the opposite side. Look for a blue cap labeled “Adblue” or a blue filler neck. It’s important to ensure that you have enough Adblue fluid in the tank before proceeding with the reset process.
Step 2: Refill the Adblue Tank
If your Adblue warning light is on, it’s likely that the Adblue tank is running low or is empty. To reset the warning, you’ll need to refill the Adblue tank with the proper fluid. Adblue fluid can be purchased at most automotive stores or Peugeot dealerships. Follow the instructions on the fluid container to ensure a proper refill.
Step 3: Start the Engine
Once the Adblue tank has been refilled, start your Peugeot Partner’s engine. Let it run for a few minutes to allow the system to recognize the new fluid level.
Step 4: Navigate to the Service Menu
Using the controls on your dashboard, navigate to the service menu. Generally, you’ll find a button labeled “Menu” or “Setup” on the dashboard. Press this button to access the main menu.
Step 5: Select the Vehicle Parameters
Within the main menu, look for the “Vehicle Parameters” or similar option and select it. This will take you to a submenu where you can adjust various settings related to your Peugeot Partner.
Step 6: Reset the Adblue Warning
Within the Vehicle Parameters submenu, search for an option labeled “Adblue” or “Urea.” Select this option to access the Adblue settings.
Step 7: Confirm the Reset
Once you’re in the Adblue settings, you should see an option to reset the warning. Select this option and confirm the reset when prompted. Your Peugeot Partner’s Adblue warning should now be successfully reset.
Step 8: Check for Proper Reset
After the reset, check your Peugeot Partner’s dashboard to ensure that the Adblue warning light has turned off. If the warning light is still illuminated, repeat the reset process, making sure to follow each step carefully.
Step 9: Drive Your Vehicle
Now that the Adblue warning has been reset, you can confidently drive your Peugeot Partner without worrying about the warning distracting you. However, it’s important to keep an eye on the Adblue level and refill the tank when necessary to prevent any future warnings.
Conclusion
Resetting the Adblue warning on your Peugeot Partner is a straightforward process that you can easily do yourself. By following the step-by-step guide outlined above, you’ll be able to reset the warning and drive your vehicle with peace of mind. Remember to always keep your Adblue tank filled to avoid any interruptions in your vehicle’s operation. If you encounter any difficulties or have additional concerns, it’s advisable to consult your vehicle’s user manual or reach out to a certified Peugeot technician for further assistance.