How To Remove Rawl Plugs From Wall


Rawl plugs are commonly used to securely anchor screws into walls, providing stability and support for a wide range of fixtures and fittings. However, there may come a time when you need to remove a rawl plug from a wall, whether you are rearranging your furniture, replacing an old fixture, or simply fixing a mistake. In this article, we will discuss the step-by-step process of how to safely and effectively remove rawl plugs from a wall, without causing any damage.

Gather the necessary tools

Before you embark on the removal process, it is important to ensure you have the right tools at hand. Here are the tools you will need:

1. Pliers: A pair of sturdy, wide-opening pliers will be the main tool for removing rawl plugs.
2. Screwdriver: Depending on the type of rawl plug you are dealing with, you may need a suitable screwdriver to assist with the removal.
3. Utility knife: This will be handy if the rawl plug is flush with the wall surface and requires a bit of cutting to access.
4. Filler and touch-up paint (optional): If you plan on filling the hole left behind by the removed rawl plug, it is useful to have appropriate filler and touch-up paint available.

Step-by-step guide

Now that you have gathered your tools, let’s dive into the step-by-step guide for removing rawl plugs from a wall:

Step 1: Assess the plug

Take a closer look at the rawl plug you want to remove. Determine if it is a plastic or metal plug. Plastic plugs are typically easier to remove, while metal ones may require a bit more effort. Additionally, check if the plug has visible screw threads, as this indicates that it was installed using an expanding plug anchor.

Step 2: Loosen the plug

If the rawl plug has visible screw threads, insert a screwdriver into the screw opening and loosen it by turning it counterclockwise. This loosening process will help release the grip of the plug inside the wall.

Step 3: Examine the plug head

Many plastic rawl plugs have a raised head that can be easily accessed with pliers. If this is the case, proceed to Step 4. However, if the plug head is flush with the wall, move on to Step 5.

Step 4: Grip and twist

Using your pliers, firmly grip the raised head of the plug. Twist the pliers gently in a counterclockwise direction to dislodge the plug from the wall. Take care not to exert excessive force, as this may cause damage to the wall.

Step 5: Cut and expose

If the rawl plug’s head is flush with the wall, use a utility knife to carefully cut around the plug in a circular motion. Make sure not to cut too deep or apply excessive pressure, as this may damage the wall. Once you have cut around the plug, gently pry it outwards with the tip of the utility knife or the edge of the pliers to expose it.

Step 6: Remove and fill

With the exposed plug, firmly grip it with the pliers and apply steady, gentle force in a counterclockwise direction to remove it from the wall. If the plug is tightly wedged, you may need to wiggle and rock it back and forth while maintaining a counterclockwise turning force. Once the plug is fully removed, you can proceed to fill the hole with an appropriate filler, followed by applying touch-up paint for a seamless finish.


Removing rawl plugs from a wall can be a simple and straightforward process if done correctly. By following the step-by-step guide outlined in this article, you can safely and effectively remove rawl plugs without causing any damage to your walls. Remember to gather the necessary tools, assess the type of plug, and employ the appropriate techniques for loosening, gripping, and removing the rawl plug. With a bit of patience and care, you can confidently tackle any rawl plug removal task that comes your way.

Leave a Comment