How to Recharge an iGet Legend
Are you wondering how to recharge your iGet Legend electric scooter? Look no further! In this article, we will guide you through the easy steps to ensure a successful recharge. Recharging your iGet Legend correctly will not only keep your scooter operating at its best, but also extend its lifespan. So, let’s get started!
Step 1: Prepare Your Charging Equipment
The first step in recharging your iGet Legend is to gather all the necessary charging equipment. You will need the following:
- An iGet Legend electric scooter
- An appropriate charger (usually provided with your scooter)
- A standard electrical outlet
Make sure your charger is in good condition and compatible with your iGet Legend scooter. If you notice any damage to the charger, do not use it and purchase a new one from a reliable source.
Step 2: Locate the Charging Port
Next, you’ll need to locate the charging port on your iGet Legend. The charging port is usually located near the rear wheel or deck of the scooter. It is a small opening with metal contacts inside.
Step 3: Plug in the Charger
Once you’ve found the charging port, take your charger and plug it into the port. Ensure that the charger is inserted properly and securely. You should feel a slight click or resistance when the charger is correctly inserted.
Step 4: Connect the Charger to a Power Outlet
After plugging the charger into your iGet Legend, find a nearby power outlet. Make sure the power outlet is active and functioning properly. Insert the charger plug into the outlet. Again, ensure a secure connection so that it doesn’t come loose during the charging process.
Step 5: Charging Status
Once the iGet Legend is connected to the power outlet, it will start charging. Most iGet Legend models have a charging indicator on the handlebar or near the charging port. The indicator light will typically turn red when charging begins.
It is important to note that the charging time will vary depending on the battery level and the charger’s specifications. Typically, it takes around 4 to 6 hours to fully recharge an iGet Legend.
Step 6: Monitoring the Charging Process
While your iGet Legend is charging, keep an eye on the charging process. If you notice any unusual behavior, such as smoke, strange sounds, or excessive heat, immediately unplug the charger and contact iGet customer support. These signs may indicate a potential issue, and it’s always better to be safe.
Step 7: Disconnect the Charger
Once the iGet Legend is fully charged, it’s time to disconnect the charger. To do this, simply unplug the charger from the power outlet and remove it from the charging port of your scooter. Be careful not to pull the cord forcefully, as it may get damaged.
It’s recommended to unplug the charger from the power outlet before removing it from the scooter, to avoid accidental damage or electric shocks.
Step 8: Store the Charger and Enjoy Your Ride
After disconnecting the charger, store it in a safe place away from moisture or extreme temperatures. Keeping the charger in a dry and moderate temperature environment will ensure its longevity.
With your iGet Legend electric scooter fully recharged, you’re now ready to hit the road and enjoy your rides to the fullest. Remember to follow all the safety guidelines provided by iGet to ensure a safe and enjoyable experience on your scooter.
Following these simple steps will help you recharge your iGet Legend properly and efficiently. Make sure to read the user manual or contact iGet customer support if you have any specific questions or concerns regarding the charging process.
Enjoy your rides, and stay safe!