How to Put Together a Frank Green Lid: A Step-by-Step Guide
Frank Green is a well-known brand that offers innovative, eco-friendly reusable products, including their signature SmartCups and SmartBottles. If you recently purchased a Frank Green lid for your cup or bottle and aren’t quite sure how to put it together, don’t worry – we’ve got you covered. In this step-by-step guide, we’ll walk you through the process of assembling a Frank Green lid so you can start enjoying your drink in style.
Gather the Required Materials
Before you begin, make sure you have all the necessary materials for assembling your Frank Green lid:
1. Frank Green lid components: The lid consists of several parts, including the outer lid, inner lid, and the lid base.
2. Frank Green cup or bottle: You’ll need a Frank Green cup or bottle to attach the lid.
3. Clean, dry workspace: Find a clean and spacious area to work on, preferably a table or countertop.
Step 1: Prepare the Lid Components
Start by unpacking the Frank Green lid components from their packaging. Ensure that all components are clean and dry before assembly.
Take the outer lid and locate the small, round silicone gasket at the center. Make sure this gasket is properly attached to the outer lid, as it helps create a tight, leak-proof seal.
Next, find the inner lid. Take note of the two small nubs or protrusions located on opposite sides of the inner lid. These nubs are designed to align with the corresponding grooves inside the outer lid.
Step 2: Attach the Inner Lid to the Outer Lid
To connect the inner and outer lids, align the nubs on the inner lid with the grooves inside the outer lid. Hold the two lids together firmly and push them together until you feel a click or snap.
Ensure that the inner lid is securely attached to the outer lid by gently pulling on them. If they separate, repeat the process to ensure a proper connection.
Note: Some Frank Green lids may have a twist-lock mechanism in addition to the click-lock feature. If your lid has this feature, make sure to twist the inner lid in a clockwise direction until it locks into place.
Step 3: Insert the Lid Base
Now it’s time to attach the lid to your Frank Green cup or bottle. Take the lid base and align it with the groove on the rim of your cup or bottle.
With one hand holding the cup or bottle, use your other hand to firmly push the lid base into place. Apply even pressure as you push, ensuring that the lid is securely attached.
Give the lid a gentle twist or wiggle to confirm that it is properly seated on the cup or bottle.
Step 4: Test for Proper Assembly
Once you’ve attached the lid to your Frank Green cup or bottle, it’s essential to test for proper assembly. Fill the cup or bottle with water or your preferred beverage, making sure not to exceed the maximum fill line.
Place a finger on the lid opening and tilt the cup or bottle to various angles, checking for any leaks or drips. If you notice any issues, disassemble the lid and repeat the previous steps to ensure a proper fit.
Cleaning and Maintenance Tips
To prolong the lifespan of your Frank Green lid and maintain its functionality, follow these cleaning and maintenance tips:
1. Hand wash recommended: While the lid is top-rack dishwasher safe, hand washing is preferred to maintain the integrity of the lids and seals.
2. Clean regularly: Wash the lid after each use with warm soapy water. Rinse thoroughly and allow it to air dry before reassembly.
3. Avoid abrasive cleaning materials: Do not use abrasive sponges or brushes, bleach, or harsh chemical cleaners on the lid, as they can damage the lid’s surface and gaskets.
4. Store with care: To prevent misplacement or damage, store the lid components together as a single unit when not in use.
Now that you’ve successfully put together your Frank Green lid, you’re ready to enjoy your favorite beverages on the go while reducing waste and looking stylish. Cheers to eco-friendly choices!