How To Make Ercol Cushion Covers
If you own an Ercol chair or sofa and want to freshen up its look, making custom cushion covers is a great way to achieve a new, personalized style. Not only will it add a touch of uniqueness to your furniture, but it can also be a fun and rewarding project. In this article, we will guide you through a step-by-step process on how to make Ercol cushion covers.
Materials Needed:
Before getting started, make sure you have the following materials ready:
– Fabric of your choice
– Measuring tape
– Sewing machine or needle and thread
– Scissors
– Iron
– Pins
– Velcro or zipper (optional)
Step 1: Measure Your Cushions
The first step in making Ercol cushion covers is to measure the dimensions of your cushions accurately. Use a measuring tape to note down the length, width, and thickness of each cushion. It’s important to measure all sides to ensure a snug fit for your covers.
Step 2: Prepare the Fabric
Choose a fabric that complements your Ercol furniture and works well with your overall interior design. Once you have your fabric, wash, dry, and iron it before starting the sewing process to prevent any shrinkage later on. It’s also a good idea to pre-wash the fabric to remove any manufacturing chemicals or residues.
Step 3: Cutting the Fabric
Now that you have accurate measurements and prepped fabric, it’s time to cut the pieces for your cushion covers. Measure and mark the dimensions on the wrong side of the fabric. Use sharp fabric scissors to cut the pieces, ensuring clean and neat edges. You will need two pieces for each cushion cover — one for the front and one for the back.
Step 4: Hemming the Edges
To give your cushion covers a professional look and prevent fraying, it’s essential to hem the edges of each fabric piece. Fold over the edges by about half an inch and press them with an iron to create a crease. Then, fold the edges again and secure them with pins. You can either sew the hems by hand or use a sewing machine for faster results. Repeat this process for all sides of both fabric pieces.
Step 5: Attaching the Velcro or Zipper (Optional)
If you prefer easy removal and washing of your cushion covers, consider attaching Velcro or a zipper to one of the longer sides of the back fabric piece. Allow for a sufficient overlap when attaching the Velcro or inserting the zipper, ensuring a secure closure.
Step 6: Sewing the Cushion Cover
Place the front and back fabric pieces together with right sides facing each other. Make sure the hemmed edges align perfectly. Pin the sides together to keep them in place, leaving the side with the Velcro or zipper open. Use a sewing machine or needle and thread to sew along the pinned sides. Start sewing at one corner, backstitching at the beginning and end to reinforce the seams.
Step 7: Turn the Cushion Cover Inside Out
Once you have sewn all sides, turn the cushion cover inside out by pulling it through the open side. Use a chopstick or pencil to push out the corners and achieve crisp edges. If you used a zipper, carefully unzip it to turn the cover inside out.
Step 8: Inserting the Cushion
Now that your cushion cover is complete, it is time to insert the cushion. Fold the cushion cover in half with the Velcro or zipper side on top. Then, gently tuck the cushion inside, making sure it fits snugly. Finally, close the Velcro or zipper to secure the cushion.
Step 9: Admire Your Handiwork
Congratulations! You have successfully made your own Ercol cushion cover. Take a step back and appreciate your creativity and effort. Enjoy the refreshed look of your Ercol furniture, knowing that you added a personal touch to your home decor.
In conclusion, making Ercol cushion covers is an excellent way to jazz up your furniture and express your style. By following the step-by-step instructions outlined in this article, you can create unique cushion covers that perfectly fit your Ercol chairs or sofas. So, gather your materials, unleash your creativity, and transform your Ercol furniture with custom-made cushion covers.